Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

Internet Service Commands don't work (EHS6T LAN) | Telit Cinterion IoT Developer Community

September 13, 2016 - 10:47am, 7631 views

Hello,

I have a problem with the configuration EHS6T LAN module. When i enter the AT^SICS=?, i get a response +CME ERROR: Unknown.

Hier is configuration:

at^scfg?

^SCFG: "Call/ECC","0"

^SCFG: "Gpio/mode/ASC1","std"

^SCFG: "Gpio/mode/DAI","gpio"

^SCFG: "Gpio/mode/DCD0","std"

^SCFG: "Gpio/mode/DSR0","std"

^SCFG: "Gpio/mode/DTR0","std"

^SCFG: "Gpio/mode/FSR","gpio"

^SCFG: "Gpio/mode/HSIC","rsv"

^SCFG: "Gpio/mode/PULSE","gpio"

^SCFG: "Gpio/mode/PWM","gpio"

^SCFG: "Gpio/mode/RING0","std"

^SCFG: "Gpio/mode/SPI","rsv"

^SCFG: "Gpio/mode/SYNC","std"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","EHS6"

^SCFG: "MEopMode/SoR","off"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "Radio/Band","511"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","1","1"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0058","Cinterion Wireless Modules","EHx",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","600"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "Userware/Autostart","0"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"

^SCFG: "Userware/DebugMode","on"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","asc1",,,,"off"

^SCFG: "Userware/Watchdog","0"

ati

Cinterion

EHS6

REVISION 02.000

Regards

Miloš