Uart access to bgs2-w over b80 eval kit | Telit Cinterion IoT Developer Community
September 6, 2016 - 9:51am, 2439 views
Hello,i tried to accessing the bgs2-w on a b80 eval kit over the uart lines that are exposed by the 2x40 pin connectors. I tried baudrates of 9600 bps and 115200 bps. Since i dont have hardware flow control available i connected the RTS and CTS pins, but as i understood from the manual flow control is disabled by default anyway.
As i understood normaly the DSB-Mini Support Board should be used for direct UART access, which i dont have available. How is it possible to switch from access over USB-VCP to access over UART?