How to Test DSB75 Module | Telit Cinterion IoT Developer Community
July 4, 2016 - 12:26pm, 2822 views
Hi,I am currently testing GPRS in DSB75 module and i wanted to test the 3G module i.e EHS5-E
through USB but am not sure how to test because there is no ttyUSB detected in my PC.I believe that ttyACM or ttyUSB will be detected without SIM card in the Module.Is There any Possiblity that power is not sufficient we are using a 12V connector and LED light seems to glow.
Is there any firmware required to flash.or can you provide any user guide on how to test .
Hello,
If you have been using some old module (for example TC65i, EGS5) with DSB75 board it was possible to plug the module directly to the board.
But if you would like to connect EHS5 module to DSB75 board you need some adapter where you will connect the module and plug the USB cable. Or there are other developer boards available.
You could ask your local Gemalto technical support for details.
Regards,
Bartłomiej
Actually we are useing a adapter on which we have mounted the EHS5 module
We would like to know the setting for USB in DSB75 and how to give the AT commands to EHS5 via DSB75 module.Please help.
Thank you,
Hi,
I have enclos
StartUp Guide EHS5_E_US V03 (18.12.2013).pdfed the StartupGuide EHS5:E_US V03 for reference. From page 7 you will find how to connect the EHS5 module. The USB to be used will be below the Multi Adapter Board. From page 11 you will find instructions how to startup the EHS5 module.
Regards,
Antero
Antero Markkula
Communication and Mechatronics
Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi