Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

BGS5T GPIO6 and GPIO8 always 0 | Telit Cinterion IoT Developer Community

February 28, 2016 - 7:29pm, 4535 views

Hello,

I am having a similar problem as https://iot-developer.thalesgroup.com/threads/bgs5t-input-gpio-allways-0

I have done everything in that post and I am able to correctly define GPIO21 and GPIO7 as input or output however I am having problems configuring GPIO8 and GPIO6. I have tried to configure them as inputs using various methods and none of them seem to work. 

^SCFG: "Call/ECC","0"

^SCFG: "GPRS/AutoAttach","enabled"

^SCFG: "Gpio/mode/ASC1","std"

^SCFG: "Gpio/mode/DAI","gpio"

^SCFG: "Gpio/mode/DCD0","std"

^SCFG: "Gpio/mode/DSR0","std"

^SCFG: "Gpio/mode/DTR0","std"

^SCFG: "Gpio/mode/FSR","gpio"

^SCFG: "Gpio/mode/PULSE","gpio"

^SCFG: "Gpio/mode/PWM","gpio"

^SCFG: "Gpio/mode/RING0","std"

^SCFG: "Gpio/mode/SPI","rsv"

^SCFG: "Gpio/mode/SYNC","std"

^SCFG: "Ident/Manufacturer","Cinterion"

^SCFG: "Ident/Product","BGS5"

^SCFG: "MEShutdown/Fso","0"

^SCFG: "MEopMode/SoR","on"

^SCFG: "Radio/Band","15"

^SCFG: "Radio/OutputPowerReduction","4"

^SCFG: "Serial/Interface/Allocation","2","2"

^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0059","Cinterion Wireless Modules","Cinterion BGx USB Com Port",""

^SCFG: "Tcp/IRT","3"

^SCFG: "Tcp/MR","10"

^SCFG: "Tcp/OT","6000"

^SCFG: "Tcp/WithURCs","on"

^SCFG: "Trace/Syslog/Otap","0"

^SCFG: "URC/Ringline","local"

^SCFG: "URC/Ringline/ActiveTime","2"

^SCFG: "Userware/Autostart","1"

^SCFG: "Userware/Autostart/Delay","0"

^SCFG: "Userware/Passwd",

^SCFG: "Userware/Stdout","asc0",,,,"off"

^SCFG: "Userware/Watchdog","1"

Any ideas? Thanks