PLS8 - Release 2.1 - TCP/IP stack | Telit Cinterion IoT Developer Community
June 17, 2015 - 5:36pm, 3084 views
I'm looking for the PLS8 LTE module (the 2.1 release) and it's embedded TCP/IP stack as described in http://m2m.gemalto.com/tl_files/cinterion/downloads/datasheets/gemalto_d....
However, when I looked at the AT command set (PLS8-E_ATC_V02.011) I found nothing about this. I was looking for some key-word such as "TCP" "Socket" "Port" ... and found nothing !
Documentation from others manufacturers like u-blox http://www.kayraelektronik.com/pdf/leon/AT_Commands_Examples_Application... clearly describes the AT commands related to the TCP/IP stack.
Can someone explain me why I do not find any information about this ?
EDIT : I found the technical documentation of the PSX8 series https://iot-developer.thalesgroup.com/documentation/pxs8-technical-infor... where some AT commands for TCP services are clearly described. The PSX8 datasheet show TCP/IP stack capability as well as the PLS8 ...
I've verified what you had described above and the result is that the PLS8 module unlike PSX8 module has no IP services (Client & server, TCP/IP & UDP, transparent & nontransparent).
So the AT Commands specification for this module is correct but the data sheet document is unfortunately incorrect. So I'm sorry for that you have been mislead by the documentation.
i am using pls8-x module and i am trying to use network at commands from pls8-x_atc_v02502.pdf. I am not able to connect the chipset to the network using a socket connection. Is it true that the TCP/IP stack has not been implemented on the PLS8-X as well just like the PLS8-E?
PLS8-X modules are new release of PLS8 and should have the internet services over AT implemented.
Please send more details: ATI1 reply and the log from AT interface.
You have also asked the same question here: https://iot-developer.thalesgroup.com/threads/pls8-data-connection
Please don't ask the same questions in more than one thread!