Gemalto is now part of the Thales Group, find out more.

You are here

EHS8 A-GPS configuration | Thales IoT Developer Community

November 25, 2015 - 3:16pm, 5234 views

Hi,

I have configured the EHS8 GPS like this:

at^sgpsc?
^SGPSC: "Engine","1"
^SGPSC: "Nmea/Output","on"
^SGPSC: "Nmea/Freq","1"
^SGPSC: "Nmea/Data","GGA,GSA,GSV,RMC,VTG"
^SGPSC: "Nmea/Interface","asc0"
^SGPSC: "Power/Antenna","auto"
^SGPSC: "****/Antenna","0"
^SGPSC: "Assist/Address","<NO ADDRESS TYPE>","<NO ADDRESS>","<NO PORT>"
^SGPSC: "Assist/Data"
^SGPSC: "Assist/Connection"

I also configured AT+CGDCONT=1,"IP","internet", AT^SGPSDNS=1,1,  AT+CGACT=1,1 and AT^SGPSC="Assist/Connection",1,0.

AT^SGPSDNS? gives: ^SGPSDNS: 1, "195.197.54.100", "195.74.0.47".

If I try to start the GPS in **** 1, I will get an error; only **** 3 is possible.

at^sgpsc="Engine","1"
+CME ERROR: operation not allowed
at^sgpsc="Engine","3"
^SGPSC: "Engine","1"

With **** 3, I will get NMEA Data out; 6 / 9 satellites on my window etc..

I am missing something: how to configure the A-GPS server address?

Antero Markkula
Communication and Mechatronics

Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi