May 8, 2015 - 10:43am, 2148 views
Is it possible to make full factory reset without ASC0 or USB interface?
Perhaps it needs to connect some pins of the module?
We need to reset baudrate ASC0 to 115200.
Version of the module is: 3.001.
It's is not posible.
you need to send at&F over RS232 or USB to reset the most of the commands to factory reset, some other commands like at^sdport has to be handled manually
What if you load midlet over the air which would issue AT command that you need? Then you don't need to plug cable to issue command. I don't know if PHS8 supports that I know that BGS5T does.
It is not possble to do factory reset with any module's pins.
© 2013-2014 Gemalto M2M GmbH