Gemalto is now part of the Thales Group, find out more.

You are here

ASC1 Default Configuration EHS6T | Thales IoT Developer Community

March 30, 2015 - 6:43pm, 4321 views

hi...

I'm trying to wire up the ASC1 on the EHS6T. From a software prespective should this work out of the box, or is the default behaviour to view the pins as GPIO? Also, should I be able to issue ATI commands from ASC1?

Here is my configuration:

at^scfg?
^SCFG: "Call/ECC","0"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Gpio/****/ASC1","std"
^SCFG: "Gpio/****/DAI","gpio"
^SCFG: "Gpio/****/DCD0","std"
^SCFG: "Gpio/****/DSR0","std"
^SCFG: "Gpio/****/DTR0","std"
^SCFG: "Gpio/****/FSR","gpio"
^SCFG: "Gpio/****/HSIC","rsv"
^SCFG: "Gpio/****/PULSE","gpio"
^SCFG: "Gpio/****/PWM","gpio"
^SCFG: "Gpio/****/RING0","std"
^SCFG: "Gpio/****/SPI","rsv"
^SCFG: "Gpio/****/SYNC","std"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","EHS6"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "MEopMode/SoR","off"
^SCFG: "Radio/Band","511"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","0058","Cinterion Wireless Modules","EHx",""
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Trace/Syslog/Otap","0"
^SCFG: "URC/Ringline","local"
^SCFG: "URC/Ringline/ActiveTime","2"
^SCFG: "Userware/Autostart","1"
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","0.0.0.0","0.0.0.0","0"
^SCFG: "Userware/DebugMode","off"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","usb4",,,,"off"
^SCFG: "Userware/Watchdog","0"

Right now I'm not sure whether my wiring is wrong or the software configuration.

many thanks

Liam