Not receving GNGGA | Telit Cinterion IoT Developer Community

November 6, 2023 - 6:30pm, 87 views

Connect Shield

Hey there Currently im working on EXs82 module, i was able to start the GNSS engine but im not reving GNGGA

Comment

Bartłomiej Gema...

Nov 7 2023 - 11:26am

Hello,

Looking into documentation (AT spec - GNSS NMEA Sentences) I can't see GNGGA supported. There's only GPGGA.

BR,

Bartłomiej

Like
1
Log in or register to post comments

pojitha

Nov 7 2023 - 2:06pm

Hey thre, Yes sry for that.

But still im receving GPGGA value 0;

These are my settings:

AT^SGPSC?                                                                       
^SGPSC: "Engine","0"                                                            
^SGPSC: "Engine/Beidou","0"                                                     
^SGPSC: "Engine/Galileo","0"                                                    
^SGPSC: "Engine/StartMode","1"                                                  
^SGPSC: "Nmea/Beidou","off"                                                     
^SGPSC: "Nmea/Galileo","off"                                                    
^SGPSC: "Nmea/Glonass","off"                                                    
^SGPSC: "Nmea/GPS","on"                                                         
^SGPSC: "Nmea/Output","on"                                                      
^SGPSC: "Nmea/Urc","off"                                                        
^SGPSC: "Nmea/Version","4.10"                                                   
^SGPSC: "Power/Psm","0"

AT^SCFG?                                                                        
^SCFG: "GPRS/AutoAttach","enabled"                                              
^SCFG: "GPRS/MTU/Mode",1                                                        
^SCFG: "GPRS/MTU/Size",1430                                                     
^SCFG: "Ident/Manufacturer","Cinterion"                                         
^SCFG: "Ident/Product","EXS82-W"                                                
^SCFG: "MEopMode/CregRoam","0"                                                  
^SCFG: "MEopMode/PowerMgmt/Suspend","0","1"                                     
^SCFG: "MEopMode/Prov/AutoSelect","on"                                          
^SCFG: "MEopMode/Prov/Cfg","fallb3gpp"                                          
^SCFG: "MEopMode/PwrSave","disabled","52","50"                                  
^SCFG: "MEopMode/RingOnData","off"                                              
^SCFG: "MEopMode/RscMgmt/Rrc","1"                                               
^SCFG: "MEShutdown/sVsup/threshold","0","0"                                     
^SCFG: "Radio/Band/2G","0000000f"                                               
^SCFG: "Radio/Band/CatM","0f0e189f","0010000200000000"                          
^SCFG: "Radio/Band/CatNB","0b0e189f","0010004200000000"                         
^SCFG: "Radio/Mtpl","0"                                                         
^SCFG: "Radio/Mtpl/2G","0"                                                      
^SCFG: "Radio/Mtpl/4G","0"                                                      
^SCFG: "Radio/OutputPowerReduction","4"                                         
^SCFG: "Radio/Suspend","1"                                                      
^SCFG: "RemoteWakeUp/Ports","current"                                           
^SCFG: "RemoteWakeUp/Ports","powerup","acm0","acm1","ecm"                       
^SCFG: "SIM/CS","0"                                                             
^SCFG: "SIM/DualMode","0"                                                       
^SCFG: "SMS/AutoAck","0"                                                        
^SCFG: "Tcp/IRT","3"                                                            
^SCFG: "Tcp/MR","10"                                                            
^SCFG: "Tcp/OT","6000"                                                          
^SCFG: "Tcp/TLS/Version","1.2","***"                                            
^SCFG: "Tcp/WithURCs","on"                                                      
^SCFG: "URC/Ringline","local"                                                   
^SCFG: "URC/Ringline/ActiveTime","2"                                            
^SCFG: "GPIO/Mode/Suspend","off"

I have use only these commands

AT^SGPSC="Engine/StartMode",1
AT^SGPSC="Engine",3

Can you help me for solve this?

Like
0
Log in or register to post comments

Bartłomiej Gema...

Nov 8 2023 - 12:32pm

What output do you get when starting GPS engine?
GPGGA shows nothing because GNSS did not get the fix yet.
Seems like the engine is receiving something but the signal is weak.
Please make sure that the antenna sees the sky. Start the engine again.
What HW do you use?

Like
0
Log in or register to post comments

You are here

Not receving GNGGA | Telit Cinterion IoT Developer Community