Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

ELS61-E R2 - FFS failure | Telit Cinterion IoT Developer Community

April 20, 2023 - 12:21pm, 403 views


We already have several cases, where ELS61 R2 are not working. 

An attempt to reinstall the firmware failed. els61-e_rev02.000_arn01.000.05 as well 06 and 07 (gwinswup.exe) they are not of any help.

gwinswup log:

[2023-04-20 09:33:46]
[2023-04-20 09:33:49]OpenAttachedFile: No. 13 file not exist
[2023-04-20 09:33:49]Disabling userware autostart...
[2023-04-20 09:33:49]Checking module Character Set ('GSM' or 'UCS2') ...
[2023-04-20 09:34:07]Restoring module state...
[2023-04-20 09:34:15]Initializing firmware update...
[2023-04-20 09:34:18]Waiting for re-enumerated USB port...
[2023-04-20 09:35:51]Warning: Timeout waiting for 1st ACK before swup start!
[2023-04-20 09:35:51]Erasing flash memory (this can take a couple of minutes without visible progress)...
[2023-04-20 09:36:06]ERROR: Unexpected or fatal response (0x0d) to block 0!
[2023-04-20 09:36:06]ERROR: Firmware update failed!
[2023-04-20 09:36:06]Parsing configuration file...
[2023-04-20 09:36:06]Restoring module state...


AT^SJAM=4 response is empty (OK)

Neither our nor the JRC MIDlet is apparently installed / available.

Does anyone have similar experiences or a solution? Thanks.


^SCFG: "MEopMode/Comp1",""
^SCFG: "Gpio/port/MCLK","GPIO4"
^SCFG: "Serial/Ifc","0"
^SCFG: "RemoteWakeUp/Event/USB","none"
^SCFG: "RemoteWakeUp/Ports","current"
^SCFG: "RemoteWakeUp/Ports","powerup"
^SCFG: "Audio/Loop","0"
^SCFG: "Call/ECC","0"
^SCFG: "Call/Speech/Codec","0"
^SCFG: "Gpio/mode/ASC1","std"
^SCFG: "Gpio/mode/DAI","gpio"
^SCFG: "Gpio/mode/DCD0","gpio"
^SCFG: "Gpio/mode/DSR0","gpio"
^SCFG: "Gpio/mode/DTR0","gpio"
^SCFG: "Gpio/mode/FSR","gpio"
^SCFG: "Gpio/mode/PULSE","gpio"
^SCFG: "Gpio/mode/PWM","gpio"
^SCFG: "Gpio/mode/RING0","gpio"
^SCFG: "Gpio/mode/SPI","rsv"
^SCFG: "Gpio/mode/SYNC","std"
^SCFG: "Gpio/mode/MCLK","gpio"
^SCFG: "GPRS/AutoAttach","enabled"
^SCFG: "Ident/Manufacturer","Cinterion"
^SCFG: "Ident/Product","ELS61-E R2"
^SCFG: "MEopMode/SoR","off"
^SCFG: "MEopMode/CregRoam","0"
^SCFG: "MeOpMode/SRPOM","0"
^SCFG: "MEShutdown/Fso","0"
^SCFG: "MEShutdown/sVsup/threshold","0","0"
^SCFG: "Radio/Band/2G","0x00000014"
^SCFG: "Radio/Band/3G","0x00000081"
^SCFG: "Radio/Band/4G","0x08080085"
^SCFG: "Radio/Mtpl/2G","0"
^SCFG: "Radio/Mtpl/3G","0"
^SCFG: "Radio/Mtpl/4G","0"
^SCFG: "Radio/OutputPowerReduction","4"
^SCFG: "Serial/Interface/Allocation","1","1"
^SCFG: "Serial/USB/DDD","0","0","0409","1E2D","005B","Cinterion Wireless Modules","ELSx",""
^SCFG: "Tcp/IRT","3"
^SCFG: "Tcp/MR","10"
^SCFG: "Tcp/OT","6000"
^SCFG: "Tcp/WithURCs","on"
^SCFG: "Tcp/TLS/Version","MIN","***"
^SCFG: "Trace/Syslog/OTAP","0"
^SCFG: "Urc/Ringline","local"
^SCFG: "Urc/Ringline/ActiveTime","2"
^SCFG: "Userware/Autostart","0"
^SCFG: "Userware/Autostart/Delay","0"
^SCFG: "Userware/DebugInterface","","","0"
^SCFG: "Userware/DebugMode","off"
^SCFG: "Userware/Passwd",
^SCFG: "Userware/Stdout","null",,,,"off"
^SCFG: "Userware/Watchdog","1"
^SCFG: "MEopMode/ExpectDTR","current"
^SCFG: "MEopMode/ExpectDTR","powerup"