Telit Cinterion IoT Developer Community
OpenWrt Raspberry Pi networking WWAN
Showcase, June 19, 2020 - 4:34pm, 5151 views
This article will help you quickly take a Raspberry Pi and configure it as an Internet Router.
We focus on OpenWrt 22.03.5 software and Telit-Cinterion Cellular module hardware.
Internet connectivity is achieved using the higher performance CDC-ECM "Wireless Ethernet Adapter" method. This uses the AT Command AT^SWWAN to be used to start the interface.
See related articles:
https://iot-developer.thalesgroup.com/tutorial/data-transfer-methods
https://iot-developer.thalesgroup.com/showcase/openwrt-raspberry-pi-netw...
https://iot-developer.thalesgroup.com/showcase/openwrt-raspberry-pi-netw...
https://iot-developer.thalesgroup.com/showcase/openwrt-raspberry-pi-netw...
https://iot-developer.thalesgroup.com/showcase/openwrt-raspberry-pi-netw...
Author
Hi Mullengers,
Why my Raspberry PI cannot detect the modem?
should I un-comment some of the line on the "install-rpi-4.sh"?
Thank you
In addion the modem I'm using is PLS-83W
PLS83-W connected over USB in its factory state will be recognised as a device called eth1 (not usb0 or wwan0).
so yes check the install script uses eth1.
to be honest you can easily configure this from the LuCI interface on web port :80 too.
Currently I have two choices eth0 and eth1, but when I choose the eth1 it says "Network device is not present".