Thales' cellular IoT products business is now part of Telit Cinterion, find out more.

You are here

PLS8 Documentation mismatch? | Telit Cinterion IoT Developer Community

December 17, 2014 - 11:13am, 5335 views

Hi,

We are currently designing a board which must support both the PHS8 and PLS8 modules. These devices are from our information supposed to be pin and feature-compatible (with the exception of LTE of course). As expected, the information provided in the overview for the PLS8 states that PCM, UART, I2S and GPS are features as with the PHS8.

http://m2m.gemalto.com/tl_files/cinterion/downloads/datasheets/gemalto_d...

However, this does not seem to be the case when reading the technical documentation from the knowledge base, as found here:

https://iot-developer.thalesgroup.com/documentation/pls8-e-technical-documentation

where none of the listed features are documented (the pads are listed as rfu).

Are we looking at the wrong documentation or is there an inconsistency in your documentation?

Regards,

Emil, LIAB ApS