Connection using Multiplex takes a long time on EMS31 | Thales IoT Developer Community
April 20, 2022 - 9:26am, 120 views
Hi, when I using the Multiplex function, it takes a long time to connect by cu.
cu -l /dev/ttyMux1 -s 460800
When using this command, it takes about 7 seconds for "connected" to be displayed.
The Multiplex function is enabled by the following command.
./linmuxcfg -p=/dev/ttymxc1 -b=460800 -c="AT+CMUX=0" -n=2 -o=0
Do you know what caused it?