Gemalto is now part of the Thales Group, find out more.

You are here

PH8-P USB audio | Thales IoT Developer Community

September 26, 2016 - 11:37am, 2135 views

Hi,

I tried to configure USB audio to a PH8-P REVISION 03.320 A-REVISION 01.000.06.

I have installed the latest driver to my Win 10 PC (Driver 6004).
First I configured the ^SCFG: "Serial/USB/Instances/Audio","1","1" and restarted with AT+CFUN=1,1.
I set the AT^SNFS=2 as only ***** 2...8 are supported for USB audio.
Then I tried to configure the AT^SAIC=4 but got +CME ERROR: operation not allowed.
Tht default is now ^SAIC: 2,1,1,3,0,0,1.

Other port commands say:at^swwan?
OK

at^sdport?
^SDPORT: 6

What is the right way to configure the USB audio port?

Best Regards, Antero

Antero Markkula
Communication and Mechatronics

Enkom Active Oy – www.enkom-active.fi
Upseerinkatu 3 A, 02600 Espoo, Finland
Mobile: +358 400 411368
Office: +358 10 204 0000
Fax: +358 10 204 0010
E-mail: antero.markkula@enkom-active.fi