URCs are not recived using ATCommand.addListener | Telit Cinterion IoT Developer Community
November 19, 2014 - 3:57pm, 4833 views
Cinterion Concept Board
After enabling URCs for rssi events with the following code the attached event listener is not called.
m_Cmd = new ATCommand(false);
String response = m_Cmd.send("at^sind=\"rssi\",1\r");
// The response is correct, an OK is given
The main thread is either sleeping or issuing other commands (tried removing all commands except the above one).
Using a terminal directly connected to a COM port seems to work correctly. I can send the same command and URCs are correctly shown in the terminal.